OEM Factory for Poly 160w Solar Panels - POLY80-36 – Gaojing

Characteristic

High quality silicon wafer guarantee，high power component output and excellent cost performance advantage are ideal for customers;
Buy high quality products at cheap prices;
Better weak-light power generation performance;
High end battery slicing technology, the series current is reduced,Reduce the internal loss of components,It is an ideal for projects in high heat areas;
load bearing 5400Pa snow load and 2400Pa wind pressure;
Automatic production line and Leading photovoltaic technology;

Performance Parameter

Peak power (Pmax):80W
Maximum Power Voltage(Vmp):18.5V
Maximum Power Current(Imp):4.32A
Open Circuit Voltage(Voc):22.09V
Short Circuit Current(Isc):4.64A
Module Efficiency(%):15.3%
Working Temperature:45℃±3
Maximum Voltage:1000V
Battery Operating Temperature:25℃±3
Standard test conditions:Air quality AM1.5,Irradiance 1000W/㎡,Battery temperature

Optional configuration

Adapter:MC4
Cable length:Customizable (50cm/90cm/other)
Back panel color:Black/White
Aluminum frame:Black/White

Advantage

Although the photoelectric conversion efficiency with polysilicon solar cells is much reduced, the 80-watt product photoelectric conversion efficiency is 15%.
The polycrystalline is receiving light in multiple directions with good directionality. Actual test, assuming that the solar light leaves a shadow on the solar panel, the reduction in the polycrystalline power current is smaller than the single plate.
The price is also very low.

Details

Our solar panels have diodes in order to prevent current recoil and stabilize the current;
The most suitable angle for solar panel mounting is the horizontal 45 °;
Solar panels should be kept clean during normal use to ensure the surface is not blocked and extend their life